This Jura Brew Group Repair Kit contains all of the necessary O-Rings to refurbish the Brew Group of the models listed below. Viewing from left to right, the 2 larger red O-Rings are for the Brew Group Pistons. The black O-Ring is for the Riser Tube. The 2 blue O-Rings are for Pressure Hose connections. Some models may not need both hose connector O-Rings. The 2 red Nut Seals are located in the Drain Valve of the Brew Group. The last 4 O-Rings are all located in the Drain Valve, As well. The largest goes on the Extension Arm of the Drain Valve. The next 2 black O-Rings seal the connection of the Extension Arm and Fluid Nipple. The last black O-Ring is located on the Fluid Nipple. We recommend adding the Metal Cap for the pusher rod. It is a NON-OEM part that replaces the white plastic cap. It is a permanent fix for the malfunctions caused by a broken plastic cap.
Related Error Messages:| Model Line: | Model: | Model Number: |
|---|---|---|
| Jura ENA Line: | ENA 3 - ENA 4 - ENA 5 - ENA 7 - ENA 8 - ENA 9 | 13466 - 13421 - 13382 - 13500 - 15282 - 13572 |
| Jura F-Line: | F7 Aroma - F8 Aroma | 13709 - 15025 |
| Jura GIGA-Line: | GIGA 5 - GIGA X3 - GIGA X7 - GIGA X8 - GIGA X9 - GIGA W3 | 13623 – 15089 - 13624 |
| Jura J-Line: | J5 - J6 - J7 - J9 - J9.2 - J9.3 - J9.4 - J80 - J85 - J90 - J95 - XJ5 - XJ9 | 13333 - 13548 - 13592 - 13673 - 15075 - 15076 - 13637 |
| Jura Z-Line: | Z5 - Z6 - Z7 - Z9 | 13214 - 13339 - 13418 - 13299 - 13549 - 13752 |
